Denne hjemmeside sætter cookies for at opnå en funktionel side og for at huske dine foretrukne indstillinger. Ved hjælp af cookies laver vi statistikker og analyserer besøg på vores side så vi sikrer, at siden hele tiden forbedres, og at vores markedsføring bliver relevant for dig. Hvis du giver dit samtykke, så tillader du, at vi sætter cookies (enten i form af egne cookies og/eller fra tredjeparter), og at vi behandler de personoplysninger, som indsamles via de cookies. Du kan læse mere om cookies i vores cookiepolitik her, hvor du også altid har mulighed for at trække dit samtykke tilbage.

Herunder kan du vælge cookies til eller fra. Navnet på de forskellige typer af cookies fortæller, hvilket formål de tjener

Gratis fragt over 2000,- inkl. moms!
30 dages returret!
Prismatch - vi matcher laveste netpris!
Dansk webshop og dansk lager!
(0,00)
(0)
Speakon for kabel, NL4FC
Speakon for kabel, NL4FC
Pris ved 1 Stk
 DKK  65,00
Inkl. moms
Varenummer: 2648
Vægt: 0 
Lagerstatus:
Levering: Lev. 1 - 2 dage
Neutrik NL4FC
Cable Connectors

Extremely reliable and robust. 2,4 and 8 pole versions with `Quick Lock` system. Neutrik unique chuck type strain relief. Cable connectors have solid contacts with screw-type terminals, a special stranded wire protection and are solderable too. Excellent price / performance ratio.
TECHNICAL DATA

Electrical
Rated current/contact: 30 A rms continous,
40 A rms 1 min.
Dielectric strength: 4kV peak
Rated voltage: 250 V ac
Contact resistance: = 3 m (= 10 m for NL4MD-H) after 5000 insertion-withdrawal operations
Insulation resistance - initial: > 2 G
- after damp heat test: > 500 M
Inrush/outrush current capability (12 V source): 300/30 A/200 ms
Creepage distance: according to IEC 664-1

Mechanical
Retention method: Quicklock with latch
Cable anchoring: NEUTRIK® chuck principle
Cable O.D. range:
6 - 10 mm (2 pole)
5 - 15 mm (4 pole)
8 - 20 mm (8 pole)
Cable retention force: = 220 N Subject to cable die and material
WIRING:
- Cable: screw-type terminals (crush ferrules provided for use with stranded cable) on 8 pole version or soldering (12 AWG stranded)
- Chassis: flat tabs for FASTON 0.187" x 0.02" (4.8 mm x 0.5 mm) or PCB-version with pins 1.6 mm x 0.5 mm (FASTON is a trademark of AMP Inc.)

Materials
Contacts: CuZn39Pb3 / ZnAI4Cu1 / CuSn8, 4 µm Ag plated
Securing element: ZnAI4Cu1, CuNi plated
Spring element: Neoprene ring
Housing: PA 6 30% GR
Insert (FC part): PBTP 20% GR
Bushing: PA 6 15% GR
Chuck: POM
Temperature range: -30°C to +80°C

WIRING

Amplifier
Stereo ("HIFI"): one NL4MP socket left channel pins 1+/1- right channel pins 2+/2-
Power ("PA) Standard: three NL4MP sockets "A" socket: left channel pins 1+/1- "B" socket: right channel pins 1+/1-
Bridged mono: "M" socket: left channel pins 1+/1- right channel pins 2+/2-
BI-Amp: one NL4MP socket low frequency pins 1+/1- high frequency pins 2+/2-

Cable
Stereo ("HIFI"): NL4FC on amplifier end, four conductor cable splits into two pairs with NL4FC on each end
Power ("PA) Standard: a two-conductor cable for each channel with NL4FC on both ends
Bridged mono: a special two-conductor cable, on both ends wired to pin 1+/2+ of NL4FC
BI-Amp: a four-conductor cable on both ends wired to pins 1+/1-, 2+/2- of NL4FC

Speaker
Stereo ("HIFI"): one NL4MP per speaker left speaker pins 1+/1- right speaker pins 2+/2-
Power ("PA) Standard: NL4MP pin 1+ to speaker coil "+" NL4MP pins 1- and 2+ to speaker coil "-"
Bridged mono: NL4MP pin 1+ to speaker coil "+" NL4MP pins 1- and 2+ to speaker coil "-"
BI-Amp: one NL4MP socket low frequency pins 1+/1- high frequency pins 2+/2-

NL4FC

4-pole cable connector with latch lock. Cable sleeve for cables 5 - 12 mm diameter. 30 A continuous per contact.





Information
BJ LYS
Bøffelkobbelvej 9
6400 Sønderborg

Kundeservice
Tlf.: +45 7448 5258
Email: info@bjlys.dk
Nyhedsmail
Tilmeld dig her...